Difference between revisions of "Hand phaser"

From Imperial Wiki
Jump to navigation Jump to search
Line 2: Line 2:


==TOS Hand Phasers==
==TOS Hand Phasers==
In the original ''[[Star Trek]]'', the Federation has two types of hand phaser.  "Phaser 1" is a small oblong device with an emitter on one end and fire controls on one of its largest surfaces.  These controls include a firing button, a dial to change the setting, and a crystal meter, presumably for reading either the setting or the charge status or both.
In the original ''[[Star Trek]]'', the Federation has two types of hand phaser.  "Phaser 1" is a small oblong device with an emitter on one end and fire controls on one of its largest surfaces.  These controls include a firing button, a dial to change the setting, and a crystal meter, presumably for reading either the setting or the charge status or both.  While such a weapon would not be easy to aim at any significant range, it is readily concealable.


"Phaser 2" is actually an add-on for Phaser 1.  The device consists of a conventional handle and trigger arrangement (although shamefully lacking a trigger guard) with a larger beam emitter at the end and a niche on top into which a Phaser 1 fits.  Presumably the Phaser 1's firing button is disabled when it is attached to a Phaser 2 handgrip, while the meter and adjustment dial function normally for the combined weapon.  The Phaser 2 attachment also has a dial at the back which presumably allows the user to adjust the spread of the beam, a feature not seen on Phaser 1.  Phaser 2 increases the power output of the weapon, and the combined device probably has greater energy reserves.
"Phaser 2" is actually an add-on for Phaser 1.  The device consists of a conventional handle and trigger arrangement (although shamefully lacking a trigger guard) with a larger beam emitter at the end and a niche on top into which a Phaser 1 fits.  Presumably the Phaser 1's firing button is disabled when it is attached to a Phaser 2 handgrip, while the meter and adjustment dial function normally for the combined weapon.  The Phaser 2 attachment also has a dial at the back which presumably allows the user to adjust the spread of the beam, a feature not seen on Phaser 1.  Phaser 2 increases the power output of the weapon, and the combined device probably has greater energy reserves.

Revision as of 13:53, 4 March 2008

A hand phaser is essentially a phaser pistol. Various models have appeared in Star Trek through the years.

TOS Hand Phasers

In the original Star Trek, the Federation has two types of hand phaser. "Phaser 1" is a small oblong device with an emitter on one end and fire controls on one of its largest surfaces. These controls include a firing button, a dial to change the setting, and a crystal meter, presumably for reading either the setting or the charge status or both. While such a weapon would not be easy to aim at any significant range, it is readily concealable.

"Phaser 2" is actually an add-on for Phaser 1. The device consists of a conventional handle and trigger arrangement (although shamefully lacking a trigger guard) with a larger beam emitter at the end and a niche on top into which a Phaser 1 fits. Presumably the Phaser 1's firing button is disabled when it is attached to a Phaser 2 handgrip, while the meter and adjustment dial function normally for the combined weapon. The Phaser 2 attachment also has a dial at the back which presumably allows the user to adjust the spread of the beam, a feature not seen on Phaser 1. Phaser 2 increases the power output of the weapon, and the combined device probably has greater energy reserves.

TNG Hand Phasers

This article is a stub and needs to be completed. You can help by editing this article.

Gallery

Era Phaser 1 Phaser 2
23rd Century
TOS Phaser-1.jpg
TOS Phaser-2.jpg
24th Century
TNG Phaser-1.jpg
TNG Phaser-2.jpg